How Much Roof Area Do You Need for Solar Panels?
By GeoArce · Updated · 5 min read
As a rule of thumb, you need about 6 m² (65 sq ft) of usable roof per kW of solar when using 440 W panels. This guide shows where that number comes from and how to adjust it for your roof.
The maths
- A typical 440 W panel is about 1.9 m².
- One kW needs 1 ÷ 0.44 ≈ 2.27 panels, so about 4.3 m² of panel surface.
- Not all of your roof is usable. Edges, vents, chimneys, skylights, water tanks and row spacing typically leave around 70% usable. So roof area per kW ≈ 4.3 ÷ 0.70 ≈ 6.2 m².
Roof area by system size
| System size | 440 W panels | Panel area | Roof area needed (70% usable) |
|---|---|---|---|
| 3 kW | 7 | 13 m² | 18.5 m² |
| 5 kW | 11 | 21.6 m² | 30.8 m² |
| 8 kW | 18 | 34.5 m² | 49.4 m² |
| 10 kW | 23 | 43.2 m² | 61.7 m² |
What reduces usable area
- Fire or safety setbacks along ridges and edges (rules vary by country).
- Chimneys, roof windows, vents, satellite dishes and AC units.
- Shade from trees, neighbouring buildings and parapet walls.
- Row spacing on flat roofs: tilted panels cast shadows on the row behind.
- North-facing planes (in the northern hemisphere), which produce much less.
Measure instead of guess
The quickest way to get a reliable number is to trace each roof plane on satellite imagery. GeoArce calculates the area for you and lets you set the usable percentage to match your roof.
Trace your roof and get your own numbers in under a minute.
Open the free calculatorFrequently asked questions
How many square feet do I need for a 5 kW system?
About 330 sq ft of usable roof (roughly 31 m²) with 440 W panels and 70% usable area.
Can I put solar panels on a flat roof?
Yes. Panels are usually mounted on tilted frames, which need extra spacing, so plan for a lower panel density than on a pitched roof.